Think with Google， 科技为艺术插上自由的翅膀
Apple computers can format the USB disk to FAT32 or exFAT through Disk Tools. 1. Open "Applications → Utility Tools → Disk Tools", and select it after inserting the USB disk; 2. Click "Erase", customize the name, and select the format (FAT32 is highly compatible but a single file does not exceed 4GB, exFAT has no such limitation and is suitable for large files); 3. Generally, select "GUID Partition Map" for partitioning schemes. If you encounter problems, you can try "MBR"; 4. After confirming the settings, click "Erase" to complete. If the FAT32 option cannot be found, you can choose "MS-DOS FAT" instead. If it is still not feasible, it may be because the system version is old or the USB drive is abnormal. You can try restarting, changing the device, or formatting it on Windows before bringing it back to your Mac for use. It is recommended to choose exFAT first in daily life, and only use FAT32 when it is compatible with old devices.
By default, Apple computers do not support directly formatting the USB flash drive to FAT32 or exFAT format, but the operation is not complicated. It only needs to be done with the help of Disk Utility. The following steps will be explained in how to format the USB drive into these two commonly used formats on a Mac.
Format USB drive using Disk Utility
This is the most common and recommended way. Open "Applications → Utility → Disk Utility", then insert the USB flash drive, select it in the list on the left (be careful not to select the wrong hard disk), and click the "Erase" button.
- Name : You can customize a name, such as "MyUSB"
- Format :
- If you choose FAT32 , the USB drive will be compatible with Windows, Mac and many old devices, but a single file cannot exceed 4GB
- If you choose exFAT , there is no limit, it is suitable for large file transfers, and it can also be used in mainstream systems
- Solution : Usually the default is "GUID Partition Graph", but if you encounter problems, you can also try to switch to "MBR" to enhance compatibility.
After setting it, click "Erase" and start formatting, and it can be completed in a few seconds.
The difference between FAT32 and exFAT
Simply put:
- FAT32 is older and has strong compatibility, but does not support single files larger than 4GB.
- exFAT is a new format developed by Microsoft, with almost no capacity restrictions and is suitable for modern usage scenarios.
If you are mainly passing files between Mac and Windows, it is recommended to choose exFAT first. Only consider FAT32 if you need to plug into particularly old devices (such as the car system from ten years ago).
What should I do if I cannot choose FAT32?
Sometimes you will find that there is no FAT32 option in disk tools, only "MS-DOS FAT" - in fact, this is FAT32, but Apple calls it differently. Just choose with confidence.
If you still can't see it, it may be that your macOS version is too old or there is an error in the USB drive itself. At this time, you can try restarting your computer, changing your Mac, or formatting it with Windows once before bringing it back to your Mac.
Basically all this is it. The whole process is not complicated, but it is easy to choose the wrong partition format or delete the data disk by mistake when doing it for the first time. Remember to confirm it in advance.
The above is the detailed content of How to format a USB drive to FAT32 or exFAT on a Mac?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
What should I do if there is no FAT32 option when formatting a USB flash drive in Win10? How to format a USB drive to FAT32 in Win10
Feb 12, 2024 pm 09:39 PM
When we use the USB flash drive, we will encounter problems such as failure or damage. At this time, formatting the USB flash drive can restore our USB flash drive to normal work. Many users who are not familiar with computers will encounter problems when formatting. There is no FAT32 option to the USB flash drive, what should I do? Let this site share with users how to format a USB drive to FAT32 in Win10. Method 1 to format a USB flash drive to FAT32 in win10: 1. First, insert the USB flash drive into the USB port of the computer. You can see the USB flash drive on my computer. The one shown here is the H drive. 2. Right-click the H drive and select "Format" in the pop-up menu. 3. Click the file system option to change the format file system according to your needs.
What is fat32 format?
Feb 22, 2023 pm 02:02 PM
FAT32 is a type of partition format. This format uses a 32-bit file allocation table, which greatly enhances its disk management capabilities and breaks through the FAT16 limit of only 4GB per partition. FAT32 is developed from FAT and FAT16. The advantage is that it has good stability and compatibility, is fully compatible with Win 9X and previous versions, and is easy to maintain. The disadvantage is that it has poor security and can only support a maximum partition of 32GB, and a single file can only Can support up to 4GB.
The difference between ntfs and fat32
Jan 05, 2024 pm 04:34 PM
The difference between ntfs and fat32: 1. Function and performance; 2. Disk partition size; 3. Single file size; 4. Security; 5. Fragmentation and space utilization; 6. Disk quota; 7. File recovery; 8. Compression and Encryption; 9. Logging; 10. File linking; 11. File access control; 12. Security. Detailed introduction: 1. Functions and performance. NTFS is a highly recoverable file system with many advanced functions, while the FAT32 file system is relatively limited in terms of functions and performance; 2. Disk partition size, etc.
How to change large-capacity USB disk to fat32 format
Nov 13, 2022 pm 02:18 PM
How to change a large-capacity U disk to FAT32 format: 1. Insert the U disk into the computer, click on the computer desktop, and click "Computer"; 2. Right-click the name of the U disk; 3. Select "Format"; 4. Click the "Start" button at the bottom and wait for the prompt "Format Completed".
What does fat32 format mean?
Mar 28, 2023 pm 02:27 PM
The fat32 format refers to the file allocation table, which is a disk file management method that uses 32-bit binary number record management. FAT is the abbreviation of File Allocation table; the advantage of the fat32 format is that it has good stability and compatibility, and can Fully compatible with Win 9X and previous versions, and easy to maintain.
What is the format of fat32?
Aug 16, 2023 am 09:32 AM
FAT32 is a file system format used to organize and store files on computers. It is a member of the FAT file system family and is widely used on various operating systems and devices, including Windows, Mac, Linux and mobile storage. Devices such as USB flash drives and SD cards, etc.
The default for USB disk is fat32
Feb 14, 2024 pm 07:54 PM
When the TV, TV box or broadband box system fails, you need to flash it at this time. When flashing, generally use a USB flash drive. Even though it is just a USB flash drive, there is a lot of knowledge in it. This article does not talk about the flashing tutorial, but only talks about the USB disk requirements. There are many types of USB flash drives on the market now, with very rich capacities, such as 8G, 16G, 32G, 64G, 128G and so on. These capacity types are relatively common. However, not all USB drives can be used to flash the box. Generally speaking, 8G or 16G USB flash drives are more commonly used when flashing. Theoretically, 32G and 64G USB flash drives can also be used. However, some set-top boxes may not support large-capacity USB flash drives. When you insert a large-capacity USB flash drive,
Format the 64gu disk into fat32 format
Feb 14, 2024 pm 04:45 PM
Usually, the copy failure is caused by the file system type of the USB flash drive being in FAT32 format. The solution is to convert it to NTFS format without formatting the USB drive. The following is a method that can directly convert the U disk file system to NTFS format. First, insert the USB disk whose file system type needs to be converted to NTFS format into the USB interface. Then, press the key combination (Win key + R) to open the run window, enter "cmd" and press the Enter key to confirm. Please refer to the figure below: In the open CMD command window, enter the following command and press Enter to execute it to convert the U disk format to NTFS format: convertg:/fs:ntfs. Among them, g represents the drive letter of the USB flash drive in the current computer. Please refer to the instructions below
